| |
| |
Connect an IDE hard drive to your motherboard's Serial ATA controller or vice versa with this Bi-Directional IDE to SATA Converter or SATA to IDE adapter!
It's easy to install and there are no drivers needed! There is a switch for either SATA to IDE or IDE to SATA. Key features include Jmicro JM20330 Chipset, 150 MB/s transfer rate, automatic SATA 3.0/1.5 Gbps speed negotiation, and support for Support 3.5-inch IDE hard drives and 5.25-inch optical drives.
|
| |
| |
Features/Specifications: |
| |
|
| |
- Bi-Directional IDE to SATA or SATA to IDE Adapter
- General Features:
- Jmicro JM20330 Chipset
- Bi-Directional adapter
- Plug and Play and Hot-Swapping capability
- 150 MB/s transfer rate
- Automatic SATA 3.0/1.5 Gbps speed negotiation
- Serial ATA 1.0 specification compliant
- Support Serial ATA hot-plug
- Support ATA Host Bridge
- Support ATA PIO and UDMA modes 0 to 4
- ATA / ATAPI Ultra DMA of transfer rate 16.7, 25, 33, 48, 66, 100, 133, and 150MB/s
- ATA / ATAPI LBA48 addressing mode associated with 2-byte sector count
- Support 3.5-inch IDE hard drives and 5.25-inch optical drives
- Ultra low power consumption
- Provide specified OOB signal detection and transmission
- Support Spread Spectrum Clocking to reduce EMI
- Support Partial/Slumber power management
- Provide adjustable TX signal amplitude and pre-emphasis level
- Master/Slave mode support
- LED power indicator
- Regulatory Approvals:
- CE
- FCC
- C-Tick
|
| |
Package Includes: |
| |
|
| |
- Bi-Directional IDE to SATA or SATA to IDE Adapter
- SATA cable
- 1 to 3 Power Adapter cable
- User Manual
|
| |
Additional Information: |
| |
|
| |
- Notes:
- Model: SY-BIR-IDESA
- UPC: 8 93047 00047 2
- Requirements:
- Windows 98SE/Me/2000/XP/Vista
|
